Samsung Office Serv 500 Page 65 General Description Manual Download | Manualshive

Page: 65 / 97

background image

4-26

Chapter 4

Business Features Package

Station Feature Descriptions

Add-On Modules (AOM)

A variety of AOMs are available for connecting to keysets. They increase the number of
available programmable keys. The keys, with red LEDs, can be used for feature keys,
DSS/BLF keys or one-touch speed dial keys.

14-Key AOM for

i

DCS Series Keysets

14 programmable keys add to the capability of any

i

DCS series keyset.

48-Key AOM for DCS (Euro) Keysets

48 programmable keys add to the capability of any DCS Euro keyset. Up to four 48-key AOMs can be
added to a keyset.

64-Key AOM for

i

DCS Series Keysets

The 64 programmable keys add to the capability of any

i

DCS series keyset. Up to four 64-key AOMs

can be added to each keyset. A maximum of eight can be installed on an ‘M’ system, and a maximum
of 32 on an ‘L’ system.

64-Key AOM (DS-5064B) for 5000 Series Keysets

The 64 programmable keys add to the capability of any 5000 series keyset. Up to four 64-key AOMs
can be added to a keyset. A maximum of eight can be installed on an ‘M’ system, and a maximum of
32 on an ‘L’ system.

Appointment Reminder

Keysets with an alarm key can be used like an alarm clock. When programmed for a specific
time, the keyset will sound a distinctive ring to remind the user of meetings or appointments.
Alarms can be set for “today” only or for every day at the same time. Up to three alarms may
be set at each keyset. Display keysets can also show a programmed message when the
alarm rings.

Automatic Hold

Station users can enable or disable automatic hold at their keysets. While a user is engaged
on an outside (C.O.) call, pressing another trunk key, route key or CALL key automatically
puts the call on hold when this feature is enabled. Pressing TRANSFER (TRSF),
CONFERENCE, PAGE or a DSS key will always automatically place the call on hold. This
type of automatic hold is not a user-selectable option.

NOTE: Internal calls cannot be automatically held.

Automatic Privacy

All conversations on outside lines and internal calls are automatically private. The privacy
feature can be turned off on a per-line basis.

«
...
63
64
65
66
67
...
»

Summary of Contents for Office Serv 500


































































































Reviews:

No comments

Related manuals for Office Serv 500

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 115

Brand: Panasonic Pages: 22

GLOBARANGE BB-GT1500E

Brand: Panasonic Pages: 10

Brand: JBL Pages: 16

Authentics L 16

Brand: JBL Pages: 17

EXAI8580 - EXAI 8580 Cordless Phone

Brand: Uniden Pages: 20

Brand: Uniden Pages: 12

Brand: Uniden Pages: 52

Brand: Uniden Pages: 27

Brand: Radio Shack Pages: 28

Wave SoundTouch IV series

Brand: Bose Pages: 32

Brand: Biamp Pages: 6

Scalekleen EV9796-01

Brand: Everpure Pages: 2

Brand: Linksys Pages: 6

Brand: Jensen Audio Pages: 20

Brand: Goodmans Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands