Samsung Office Serv 500 General Description Manual Download | Manualshive

Page: 25 / 97

background image

2-10

Chapter 2

Hardware Descriptions

OTHER CARDS

Auto Attendant

This optional 8-port card can be used for the Automated Attendant, or Uniform Call
Distribution (UCD) or a combination of both. For more information about the Automated
Attendant and UCD, see the

System Features

section in Chapter 4.

SVMi-8 / SVMi-16

The SVMi-8 / SVMi-16 Voice Mail system is a fully integrated Auto Attendant/Voice Mail
System on a single card. The SVMi-8 card provides four or eight channels of communication;
the SVMi-16 card provides up to 16 channels. Only one card is permitted per system and it
can be installed in any universal card slot.

This fully featured self contained system is connected directly to the system data bus and
communicates with the system processor. This design means that installation time is
minimized, operation is streamlined and many features can be implemented that are not
normally possible with older conventional standalone Voice Mail/Auto Attendant systems.

All power to run this self-contained system comes from the system power supply. Each
power supply is rated according to the number of stations it will support. When the card is
installed it counts as eight stations of the PSU rating regardless of the number of Voice
Processing Modules installed.

Cadence

Samsung’s proprietary integrated Voice Mail and Auto Attendant card (CVM8A) provides four
or eight ports of voice processing. Because it is built into the system it provides such features
as one-touch Call Record, Answering Machine Emulation and Voice Mailbox Administration
with interactive keyset displays. Only one card is permitted per system and it can be installed
in any universal card slot.

VDIAL

The VDIAL card is installed in any universal slot in the system, and is used for making calls
by voice rather than by pressing the phone keys. The module comprises both random access
memory (RAM) and read-only memory (ROM) for storing voice data and programs.

8WLI

The 8WLI card provides a wireless LAN (WLAN) service to the system via a cable interface
between the system and WLAN base stations (WBS24), the Access Points for WLAN. A
single 8WLI card:

y

Supports 32 voice channels

y

Performs initialization to service VoIP over WLAN

y

Manages information on all voice terminals and provides service only for authorized

terminals

y

Provides initial registration service for wireless IP phones (WIP-5000M)

y

Supports mobility and handover between base stations for voice terminals.

«
...
23
24
25
26
27
...
»

Summary of Contents for Office Serv 500


































































































Reviews:

No comments

Related manuals for Office Serv 500

Brand: Magnavox Pages: 26

Brand: Aastra Pages: 16

Ascotel Office 135

Brand: Aastra Pages: 2

Brand: iDance Pages: 10

Brand: Panasonic Pages: 88

Brand: Swyx Pages: 4

Brand: W. A. Production Pages: 5

Brand: Uniden Pages: 48

Brand: Sagem Pages: 64

Brand: Gigaset Pages: 58

Brand: Aastra Pages: 113

RS2135I - Compact Audio System

Brand: RCA Pages: 13

Brand: RCA Pages: 19

Brand: RCA Pages: 21

Brand: Tecdesk Pages: 18

Brand: Kitsound Pages: 10

Brand: Honeywell Pages: 28

SILENT KHIGHT SK-FFT

Brand: Honeywell Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands