45
RACK POSITIONS
It is important to place the wire rack
into the oven properly. Do not allow
wire rack to touch rear wall of the
oven. Rack positions are shown in the
next figure. You may place a deep tray
or a standard tray in the lower and
upper side racks.
Installing and removing side racks
To remove side racks, press the clips, first remove the lower,
and than the upper side from installation location. To install side
racks; reverse the procedure for removing side rack.
USING WIRE RACK
Please put the bent up frame side to the
back, in order to support the restposition
when cooking big loads.
CLEANING AND MAINTENANCE OF THE OVEN’S FRONT DOOR
GLASS
Remove the profile by unscrewing the screws on both left and
right sides as shown on figure 17 and pulling the profile towards
yourself as shown on figure 18. Then remove the inner-glass as
shown in figure 19. If required, middle glass can be removed in
the same way. After cleaning and maintenance are done, remount
the glasses and the profile in reverse order. Make sure the profile
is properly seated in its place.
Rack 4
Rack 3
Rack 2
Rack 1
1
2
Figure 19
Figure 17
Figure 18