manualshive.com logo in svg

Samsung NY90T5010SS, User & Installation Manual, Page: 39 / 51

Share
Download
Samsung NY90T5010SS User & Installation Manual Download Page 39

39

  

The audible warning time can be set to any time between “

00:00

” 

and

 

“

23:59

”  hours.  The  audible  warning  time  is  for  warning 

purposes only. The oven will not

 be activated with this function.

 

  

Audible warning time adjustment

Press “

TIMER MODE

”.

 The symbol   will begin to flash 

and “000” will be displayed.

1.

Select the desired

 time period using the “+” and “-” 

keys while    is flashing.

The symbol   will

 remain illuminated, the time will 

be saved and the warning will be set.

When the timer reaches zero, an audible warning will

 sound and 

the symbol    will flash on the display. Press any key to stop the 
audible warning. 

 

  

Semi-automatic time adjustment (cooking period)

 

This function helps you to cook for a fixed period of time. A time 

range  between  0  and  10  hours  can  be  set.  Prepare  the  food  for 
cooking and put it in the oven.

2.

3.

Summary of Contents for NY90T5010SS




















































Reviews:

No comments