manualshive.com logo in svg

Samsung NY90T5010SS, User & Installation Manual, Page: 34 / 51

Share
Download
Samsung NY90T5010SS User & Installation Manual Download Page 34

34

2.

 Do not continuously operate the igniter for more than 15 

seconds. If the burner does not ignite, wait minimum one minute 
before try again. 

3.

 In models with gas security system, when flame of the cooker 

is extinguished, control valve cuts off the gas automatically. For 
operate the burners with gas security system you must press the 
knob and turn counter-clock-wise. After the ignition you must 
wait nearly 5-10 second for gas security systems activation. If 
the burner is extinguished for of the any reason, close the gas 
control valve and wait a minimum of one minute before trying 
again.

4. 

  Closed  

  Fully open  

  Half open

5.

 Before operating your hob please make sure that the burner 

caps are well positioned. The right placement of the burner caps 
are shown as below.

POT SIZES

Auxiliary burner

12-18 cm

Semi-rapid burner

18-22 cm

Rapid burner

22-26 cm

Triple burner

26-32 cm

Figure 10

Figure 11

Incorrect

Incorrect

Incorrect

Correct

Summary of Contents for NY90T5010SS




















































Reviews:

No comments