Samsung NY90T5010SS User & Installation Manual Download

Page: 2 / 51

Dear User,

Our objective is to make this product provide you with the

best output which is manufactured in our modern facilities in
a careful working environment, in compliance with total quality
concept.

Therefore, we suggest you to read the user manual carefully

before using the product and, keep it permanently at your
disposal.

Note:

This user manual is prepared for more than one model.

Some of the features specified in the Manual may not be
available in your appliance.

All our appliances are only for domestic use, not for commercial

use.

Products marked with (*) are optional.

“THIS APPLIANCE SHALL BE INSTALLED IN ACCORDANCE WITH

THE REGULA TIONS FORCE AND ONLY USED IN A WELL VENTILATED
SPACE. READ THE INSTRUCTIONS BEFORE INSTALLING OR USING
THIS APPLIANCE”

Summary of Contents for NY90T5010SS




















































Search results

Summary of Contents for NY90T5010SS

Reviews:

Related manuals for NY90T5010SS

Brands by name

Popular brands

Samsung NY90T5010SS, User & Installation Manual

Search results

Summary of Contents for NY90T5010SS

Reviews:

Related manuals for NY90T5010SS

Brands by name

Popular brands