30
3. Disassembly and Reassembly
This document can not be used without Samsung’s authorization.
3-18 Replacing the Burner Bake
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Explanation Photo
Explanation
Burner Bake
CONNECTOR
1.
Turn off the electrical supply going
to the range .
2.
Shut off the gas shut-off valve in
the gas supply line to the range .
3.
Open the oven door and remove
the racks from inside the oven .
4.
Pull on the wires or the connector
until the wire connector appears
from the back wall of the warming
drawer opening .
5.
Disconnect the connector of HSI of
the burner bake .
BRACKET
BAKE SPREADER
CAVITY FLOOR
6.
Remove the two screws from the
back of the cavity floor . Lift back to
clear the front edge and lift out the
cavity floor .
7.
Remove 2 screws from the front of
the bracket bake-spreader .
8.
Lift front the bracket bake-
spreader and lift out the bracket-
bake spreader .
9.
Lift up the burner bake from the
holder-bake burner on the bottom
of the drawer .
