manualshive.com logo in svg

Samsung NP28, User Manual

Share
Download
Samsung NP28 User Manual Download Page 83

70  Users Manual

Monitoring the Battery Charge

To monitor using a shortcut key

Press 

<Fn>+<F2/  

> 

keys to view the remaining battery charge. (p10)

To monitor in control panel

Click 

Start > Control Panel > Performance and Management > Power Options > 

Power Meter

 tab. Power source and remaining battery charge are displayed.

Using the battery

The battery has an expendable supply, so when you use it for a long time, the 
capacity/battery life is shortened. If the battery life is reduced to under half of 
the initial time, we recommend that you purchase a new battery to use.

Battery Warning

You will hear an alarm when the remaining battery charge is under 10%. 
Connect the power cable or turn off the computer and install a fully charged 
battery.
When the remaining battery charge is under 3%, the computer automatically 
saves current work and turns off. This may be different according to the 
settings in 

Control Panel > Performance and Maintenance > Power 

Options > Alarms

 tab.

Power supply status

Remaining battery charge

Summary of Contents for NP28



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands