manualshive.com logo in svg

Samsung NP28, User Manual

Share
Download
Samsung NP28 User Manual Download Page 28

Getting Started   15

Reading the Status Indicators

LED

Name

Function

Num Lock

Turns on when the numeric keypad is activated.

Caps Lock

Turns on when the user has set the option for typing letters in upper case.

Scroll Lock

Turns on when it is set to scroll the screen up and down while the cursor 
position does not change in some applications.

HDD

Blinks when the hard disk drive is operating.

Touchpad

Turns the light on if the touchpad is locked.

Wireless LAN

The light turns on when the wireless LAN service is activated.

Battery 

Turns green - when the battery is fully charged, or when the battery is not 
installed.
Turns amber - when the battery is being charged.
Blinks - when the battery is not properly installed.

Power

Turns on - when the computer is turned on.
Blinks - when the computer is in Standby mode.
             when the computer is in low noise mode.

Summary of Contents for NP28



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands