manualshive.com logo in svg

Samsung NP28, User Manual

Share
Download
Samsung NP28 User Manual Download Page 75

62  Users Manual

Configuring the Display Properties

In the Display Properties, you can configure detailed display settings. For example, 
you can configure the LCD to a primary device and the CRT to a secondary device by 
completing the following procedures.

1.

Connect the monitor to the monitor port of the computer. 

2.

Press touchpad right button on the desktop, and click 

Properties

.

3.

In the [Display Properties] dialog box, click the 

Settings 

tab 

> Advanced > 

Display

 tab.

4.

When only Panel(LCD) is selected, click the red tab of Monitor(CRT). Then the 
tabs of both CRT and LCD turn green. Now both display devices are selected. The 
LCD is configured to a primary display device, and the CRT is configured to a 
secondary display device. Click 

OK

.

Now you can view the same screen through the LCD and the CRT.

If the screen is not clear, adjust the screen resolution and the colour quality. 
(p60)
You cannot configure more than one device to a primary display device. Since 
the screen display is supported on the basis of the primary display device, 
some functions such as panel arrangement are not available for the secondary 
display device.

Configured to a primary 
display device

Configured to a secondary

display device

Summary of Contents for NP28



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands