Samsung NP-P560-AA03US User Manual Download

Page: 33 / 221

European Union CE Marking and

Compliance Notices

Products intended for sale within the European Union are

marked with the Conformité Européene (CE) Marking,

which indicates compliance with the applicable Directives

and European standards and amendments identified

below. This equipment also carries the Class 2 identifier.

The following information is only applicable to systems

labeled with the CE mark

European Directives

This Information Technology Equipment has been

tested and found to comply with the following European

directives:
■

EMC Directive 89/336/EEC with amending

directives 92/31/EEC & 93/68/EEC as per

–  EN 55022 Class B
–  EN 61000-3-2
–  EN 61000-3-3
–  EN 55024

■

Low Voltage Directive (Safety) 73/23/EEC as per EN

60950(A1/A2/A3/A4/A11)

■

Radio and Telecom Terminal Equipment Directive

1999/5/EC as per

– CTR21 (if fitted with a modem device)
– ETS 300 328 (if fitted with a 2.4 GHz band embedded

wireless device)

– ETS 301 489-1 (if fitted with a 2.4 GHz band embedded

wireless device)

– ETS 301 489-17 (if fitted with a 2.4 GHz band embedded

wireless device)

European Radio Approval Information (for

products fitted with EU-approved radio

devices)

This Product is a Notebook computer; low power,

Radio LAN type devices (radio frequency (RF) wireless

communication devices), operating in the 2.4 GHz band,

may be present (embedded) in your notebook system

which is intended for home or office use. This section is

only applicable if these devices are present. Refer to the

system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only

qualified for use in the European Union or associated

areas if a CE mark

with a Notified Body Registration

Number and the Alert Symbol is on the system label.
The power output of the wireless device or devices that

may be embedded in you notebook is well below the

RF exposure limits as set by the European Commission

through the R&TTE directive.

Caution

See 802.11b and 802.11g restrictions for specific

countries or regions within countries under the

heading “European Economic Area Restrictions”

below.

European Union

Summary of Contents for NP-P560-AA03US






























































































































































































































Search results

Summary of Contents for NP-P560-AA03US

Reviews:

Related manuals for NP-P560-AA03US

Brands by name

Popular brands

Samsung NP-P560-AA03US, User Manual

Search results

Summary of Contents for NP-P560-AA03US

Reviews:

Related manuals for NP-P560-AA03US

Brands by name

Popular brands