manualshive.com logo in svg

Samsung NP-G10, User Manual

Share
Download
Samsung NP-G10 User Manual Download Page 73

54  Users Manual

AVStation Viewer

This is a multimedia program that can play music, photos, video, movies, etc. in full screen.

Before You Start!

•

The AVStation Viewer program is optional and may not be provided 
depending on the computer model.

•

AVStation Viewer Restrictions

Using AVStation Viewer, you can only play files registered to the AVStation 
premium Library. (For the procedures to register files to the Library, refer to 

p45

,

 p49

 and 

p53

.)

•

The screen figures may differ from actual ones depending on the program 
version.

•

TV Station is only available for systems supporting the TV function.

Start / Exit AVStation Viewer 

Starting

Select 

Start > All Programs > Samsung > AVStation premium > AVStation View-

er

 from Windows.

Exiting

Move the mouse pointer to the top of the screen and click the Exit (

) button.

Summary of Contents for NP-G10




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands