manualshive.com logo in svg

Samsung NP-G10, User Manual

Share
Download
Samsung NP-G10 User Manual Download Page 129

110  Users Manual

Sound Related

Q1

How to install and uninstall the sound driver

A

To install or uninstall the sound driver from this system, please follow the proce-
dures below.

•

Sound Driver Components

The sound driver consists of the following 3 components and the 3 components 
are automatically installed during the installation.

–

High Definition Audio - KB888111: 

Microsoft UAA Bus Driver for High 

Definition Audio

–

Realtek High Definition Audio Driver:

 Realtek High Definition Audio

– Samsung EDS

•

Uninstalling the Sound Driver

To remove the sound driver due to a problem or for an update, follow the proce-
dures below.

If you do not follow the sequence below, the sound driver may not be removed 
or the reinstalled driver, or may not work properly.

z

 Select 

Start > Control Panel > Add or Remove Programs

.

x

 Remove 

Samsung EDS

 first.

c

 Remove 

Realtek High Definition Audio Driver

 and restart the computer.

Do not remove the 

High Definition Audio

 item. Removing this item also re-

moves the modem device driver.

If you have removed this item, you need to install the modem device driver 
again.

•

Reinstalling the Sound Driver

If there is an already installed sound driver, uninstall the driver according to the 
procedures above. 

The sound driver is included on the System Software Media.

z

 Insert the System Software CD-ROM into the CD-ROM drive.

x

 Select the Sound Driver on either Standard Installation or Custom Installation, 

then the 3 components of the sound driver are automatically installed.

Summary of Contents for NP-G10




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands