manualshive.com logo in svg

Samsung NP-G10, User Manual

Share
Download
Samsung NP-G10 User Manual Download Page 151

132  Users Manual

What is partition configuration?

Partition configuration is a function that devides the hard disk drive into one or 
several partitions. Note that changing the partition deletes all of the data on the 
hard disk drive.

5.

Select the folder to install the Windows operating system.
To delete the previous version of Windows and install in the current folder, press 

<L>

 on the keyboard.

If you press ESC to select another folder for the installation, new Windows 
folders are created causing a risk of dual booting.

    

6.

After the installation process copies the necessary folders for the Windows instal-
lation, restart the system, and the message “Press any key to boot from CD” is dis-
played. You do not need to enter anything. In a moment, the Windows XP 
installation screen will appear to proceed with the installation. 

7.

When 

the Regional and Language Options

 window appears, click 

Next

.

8.

When a window that requires your name and organization pops up, enter your 
name and the organization and click 

Next

. 

In the Windows XP Professional edition, an additional window that requires the 
computer name and the administrator password appears. 
Enter 

the computer name and the administrator password

 and click 

Next

.  

9.

When 

the Date and Time Settings

 window appears, click 

Next

. 

Setup will continue. 

10.

When the system restarts to display  Press any key to boot from CD, do not press 
any key.

When you see the Windows desktop, this means that the installation process is com-
pleted. Remove the system recovery CD and install 

the device drivers and applica-

tions

 from 

the system software Media

. 

Summary of Contents for NP-G10




































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands