English 15
Installation instructions
Correct installation
4.
With bottom side first, gently put the
cooktop down.
•
Make sure the front of the countertop is
parallel to the cooktop
•
Make final check that all required
clearances are met.
Front of unit
Gas inlet
Power cord
Hold Down Bracket Installation
Hold down
bracket holes
5.
Secure the cooktop to the countertop
using the two provided hold-down
brackets as shown.
Hold down bracket install guide
M4 L10 screw
M4 L16 screw
Case 1.
Countertop
Side wall of
undercounter
cabinet
Hold down
bracket
W
3
/
16
L75 screw
Case 2.
Countertop
Chassis
Hold down
bracket
Chassis
M4 L10 screw
Step 3. Connect the cooktop to gas supply
Shut off the main gas supply valve before disconnecting the old cooktop and leave
it off until the new hookup has been completed. Don’t forget to relight the burner
on other gas appliances when you turn the gas back on.
Because hard piping restricts movement of the cooktop, the use of a CSA
International-certified flexible metal appliance connector is recommended unless
local codes require a hard-piped connection.
WARNING
If the information in this manual is not followed exactly, a fire or explosion may
result, causing death, personal injury, or property damage.
– Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS:
•
DO NOT light a match, candle, or cigarette.
•
DO NOT try to light any appliance.
•
DO NOT touch any electrical switch.
•
DO NOT use any phone in your building.
•
Clear the room, building, or area of all occupants.
Install_NA30R5310FG_AA_DG68-01133A-00_EN.indd 15
2019-04-12 12:13:35
