20 English
Installation instructions
Installation instructions
Step 9. Install the grates
36” Model : NA36R5310F*
NOTE
Install the grates as instructed below for longest life. When installed properly, the
openings in the grates are centered over the burners.
The three cooktop grates are designed to fit in specific positions on the cooktop.
For maximum stability, these grates should only be used in their proper positions.
•
Place the left and right grates so that the thicker side of the right grate lines up
with the right side of the cooktop and the thicker side of the left grate lines up
with the left side of the cooktop.
•
The center grate must be installed with the filled-in section, marked with the
word ‘BACK’, oriented towards the back of the cooktop.
The center grate has two overhangs to help you locate the side grates correctly. It
hits the side grates when you locate wrong direction. See the illustration below.
To replace the grates correctly, follow these steps:
1.
Orient the center grate as noted direction.
2.
Gently lower the legs of the center grate so that leg dimples can match
embosses on cooktop.
3.
Locate thicker side of remaining two grates to face outside of cooktop
4.
Gently lower the legs of two remaining grates into the corresponding embosses
without interfering with center grate overhang.
Thicker side must
be on the left
Thicker side must
be on the right
Install_NA30R5310FG_AA_DG68-01133A-00_EN.indd 20
2019-04-12 12:13:37
