02
Getting Started
Rear Panel
1
POWER
•
Insert only the provided power cable.
2
FM Antenna Terminals
1.
Connect the FM antenna to the FM
antenna connector terminal.
2.
Slowly move the antenna wire until you find
a location where reception is good, then
fasten it to a wall or other rigid surface.
3
AUX IN 2 Terminals
1.
Use an Audio Cable (not supplied) to
connect AUX IN 2 on the main unit to
Audio Out on an external analog output
device.
•
Be sure to match connector colors.
•
If the external analog output device has
only one Audio Out jack, connect either
left or right.
•
Press the
AUX 1/2
button to select
AUX 2.
•
If the product is in AUX mode for more
than eight hours and no buttons on the
front panel or remote are pushed, the
system will turn off.
4
AUX IN 1 Terminals
1.
Use to connect an external device such as
an MP3 player.
•
Connect AUX IN 1 on the rear panel
of the main unit to the Audio Out of an
external device/MP3 player.
•
Press the
AUX 1/2
button to select
AUX1.
5
LED Terminals for Speaker Beat
Waving.
6
ONLY FOR SERVICE
•
This jack is for testing only. Please do
not use.
7
Cooling fan
•
The fan operates while the unit is
powered on.
If you set the unit to the minimum
volume, the fan won't operate.
Secure a minimum 6 inches (15 cm) of
clear space on all sides of the fan when
installing the main unit.
8
2.2 CH Speaker Terminals
1.
To achieve the correct sound quality,
when you connect the speakers, match
the color of the speaker plugs to the
color of the speaker jacks. See below.
•
LEFT channel (marked , White/Purple).
•
RIGHT channel (marked , Red/Purple).
•
Don't force the Purple SUBWOOFER
connector into the White or Red speaker
jack.
7
English
2
1
34 5 6
8
7
[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 7
2015-03-23 오전 11:08:51
