Functions
3.
Press the
MO/ST
button to switch between
stereo and mono.
•
In a poor reception area, select
MONO
for
a clear, interference-free broadcast.
•
This applies only when listening to an FM
station.
4.
Find a station by:
•
Pressing and holding the
TUNING
1
/
2
or
,
/
.
button on the remote control
to automatically search for broadcasting
stations.
5.
If you do not want to store the radio station
found, go back to Step
3
and search for
another station.
Otherwise:
a.
Press the
¬
button.
b.
Or, press the
TUNING
1
/
2
or
,
/
.
button on the remote control to select a
program number in the
PRESET
mode.
c.
Press the
¬
button to save the preset.
6.
To store other radio frequencies, repeat Steps
4
to
5
.
|
NOTE
|
✎
In Tuner mode
- In the
MANUAL
mode, you can use the
1
or
2
button.
- In the
PRESET
mode, you can use the
1
or
2
button on the main unit to search a
stored radio station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1.
Select
FM
by pressing the
TUNER
button on
the main unit or remote control.
2.
Press the
TUNING MODE
button on the
remote control or the
5
button on the main
unit one or more times until "
PRESET
" is
displayed.
3.
Press the
MEMORY
button on the main unit
or remote control, when the desired station is
displayed, then the station stored.
4.
Press the
1
,
2
buttons on the main unit or
the
TUNING
1
/
2
or
,
/
.
buttons on the
remote control to select a preset number.
or
You can use the
TUNING
1
/
2
or
,
/
.
button to select the stored station.
Timer function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1.
Press the
TIMER SET
button on the remote
control twice. "
CLOCK SET
" is displayed.
2.
Press the
¬
button on the remote control.
The hour flashes.
•
To increase the hours:
,
•
To decrease the hours:
.
3.
When the correct hour is displayed, press the
¬
button, and then the minutes flash.
•
To increase the minutes:
,
•
To decrease the minutes:
.
4.
When the correct minute is displayed, press
the
¬
button. "
TIMER PLAY SET
" appears
in the display.
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
•
Before setting the timer, check that the current
time is correct.
•
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
•
If you no longer want the product to be switched
on or off automatically, you must cancel the
timer by pressing the
TIMER ON/OFF
button.
20
English
[MX-JS9000-SJ,ZN]AH68-02850E-00ENG.indd 20
2015-03-23 오전 11:08:56
