Samsung MWR-WG00JN, Installation Manual

Page: 3 / 26

Sa
fe
ty
In
fo
rm
at
io
n
3 English
This installation manual explains how to install a Wired Remote Controller connected to the indoor unit of your
Samsung system air conditioner. Please read this manual thoroughly before installing the product. (Please refer to
appropriate installation for any optional product installation.)
Safety Information
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result minor personal injury or property damage.
WARNING
Contact a service centre for installation.
࡙
Potential risk of malfunction, water leak, electric
shock and fire.
Install the product on a hard and even place that can
support its weight.
࡙
If the place cannot support its weight, the product
may fall down and it may cause product damage.
Install the product with proper power supply.
࡙
Potential risk of fire or product damage.
Do not move or reinstall the product on your discretion.
࡙
Potential risk of electric shock or fire.
Consult the place of purchase or a contact centre to
disassemble or repair the product.
࡙
Potential risk of malfunction, electric shock, or fire.
Check if the installation work is done correctly
according to the installation manual.
࡙
Incorrect installation may cause electric shock or
fire.
The electric work must be done by qualified person
according to national wiring regulations and
installation guide.
࡙
If an unauthorized person performs the installation,
any resulting defects can cause malfunctions,
electrical shocks, or fire accidents.
When you want to dispose your Wired Remote
Controller, ask the service centre.
CAUTION
Do not install the product where there’s combustible
gas.
࡙
Potential risk of fire and explosion.
Do not install the product in areas exposed to oil or
vapor.
࡙
Potential risk of product damage or malfunction.
Ensure no water gets into the Wired Remote Controller.
࡙
Potential risk of electric shock or fire.
Do not put undue stress on the power cable.
࡙
Potential risk of broken cable and fire.
Install the air conditioner away from direct exposure
to sunlight, in room temperature range of 0 °C(32 °F)~
39 °C(102 °F).
࡙
Potential risk of electric shock or malfunction.
Do not install the product in areas with frequent use of
acid or alkali spray.
࡙
Potential risk of electric shock or product
malfunction.
Do not handle the product with sharp objects.
࡙
Potential risk of electric shock or product damage.
Do not connect power cable to a communication
terminal.
࡙
Potential risk of fire.
Be cautious not to interfere any other electrical devices
if the product is installed in a place such as hospital.
࡙
Potential risk of product malfunction.