Samsung MWR-WG00JN, Installation Manual

Page: 6 / 26

Wired Remote Controller Installation
6 English
Wired Remote Controller Installation
Wir
ed Remot
e C
ontr
oll
er
Installation
3 Using two or more screws, firmly affix the rear cover of the remote controller to the wall, and then cut off the
grooves of the front covers for communication and power cables, making sure these cables have reasonable
length.
ߢߡई͔͔࣍ߡࢋߥ
inch) or more
ߢߡई͔͔࣍ߡࢋߥ
inch) or more
ߦߡई͔͔࣍ߣई̈͝ʀ˵࣎
or more
ߢߡई͔͔࣍ߡࢋߥ̈͝ʀ˵࣎ͱθ͔ͱθʪ
Screw hole
Rear cover
࢘9ʪ˙ͱθʪ˙̈ӱ͝˝ϩ˵ʪθʪɇθʀͱЭʪθࡡ
ϑʪʀЇθʪɇϩ̷ʪɇϑϩߢߡई͔͔࣍ߡࢋߥई̈͝ʀ˵࣎
space of upper side, left side,
θ̈˝˵ϩϑ̈ʒʪࡡɇ͝ʒߦߡई͔͔࣍ߣई̈͝ʀ˵࣎
space of bottom side.
࢘ǽͱЇ͔Їϑϩ˙̈ϩϩ˵ʪ
screws into the
screw holes.
4 Connect the communication cables (F3, F4) to the terminals of the back of the front cover, and then fix the wires
so that they do not get stuck during connection.
V1 F1 F2 V2 F3 F4
PCB terminal
Front cover
Wire (not supplied)
࢘Uͱ͝ͱϩϩ̈˝˵ϩʪ͝ϩ˵ʪϑʀθʪиϑͱ͝ϩ˵ʪťA9
terminal with excessive force.
Indoor
Wired
Remote
Controller
CAUTION
࡙
When using an electric screwdriver, tighten the screws to the standard torque because the top of screws may be
worn out if you use a strong torque.