Samsung MWR-SH11UN, Installation Manual

Page: 18 / 20

ENGLISH-18
Wired remote controller installation/service mode
4)* RMC(1) : 0~F/RMC(2) : 0~F (hexadecimal digits)
When RMC(1) is set as F, RMC(2) setting is only available up to E. (RMC(1): Group channel, RMC(2): Group address)
• Main address of the indoor unit is displayed and entered in hexadecimal digits. Please refer to the following table.
NOTE
Hexadecimal Decimal Hexadecimal Decimal Hexadecimal Decimal Hexadecimal Decimal Hexadecimal Decimal
00 0 10 16 20 32 30 48 40 64
01 1 11 17 21 33 31 49 41 65
02 2 12 18 22 34 32 50 42 66
03 3 13 19 23 35 33 51 43 67
04 4 14 20 24 36 34 52 44 68
05 5 15 21 25 37 35 53 45 69
06 6 16 22 26 38 36 54 46 70
07 7 17 23 27 39 37 55 47 71
08 8 18 24 28 40 38 56 48 72
09 9 19 25 29 41 39 57 49 73
0A 10 1A 26 2A 42 3A 58 4A 74
0B 11 1B 27 2B 43 3B 59 4B 75
0C 12 1C 28 2C 44 3C 60 4C 76
0D 13 1D 29 2D 45 3D 61 4D 77
0E 14 1E 30 2E 46 3E 62 4E 78
0F 15 1F 31 2F 47 3F 63 4F 79
5)* The total option codes are 24 digits. You can set six digits at a time and it is distinguished by number.
- Press the [ Fan ] button to go to the next page.
• Indoor unit's option setting is from SEG1 to SEG24.
- SEG1, SEG7, SEG13, SEG19 cannot be set and will not be displayed.
- SEG2 is a type of option and it cannot be set.
- Each SEG is displayed in the corresponding page below:
. SEG2 ~ SEG6 : Page1 ~ Page5
. SEG8 ~ SEG12 : Page6 ~Page10
. SEG14 ~ SEG18 : Page11 ~ Page15
. SEG20 ~ SEG24 : Page16 ~ Page20
- Press the [ Fan ] button to go to the next page.
CAUTION
Page1 Page2 Page3 Page4 Page5 Page6 Page7 Page8 Page9 Page10
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
0 X X X X X 1 X X X X X
Page11 Page12 Page13 Page14 Page15 Page16 Page17 Page18 Page19 Page20
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
2 X X X X X 3 X X X X X
<SEG 2>
PAGE 1
PAGE 2 PAGE 3
<SEG 3> <SEG 4>