Samsung ML-2250 Series User Manual Download Page 83

Page: 83 / 195

RINTING

ASKS

From the software application

When you change the print settings from your software
application, access the printer properties. See page 4.2.

Click the

Graphics

tab, and select the

Toner Save

option.

You can select from:

•

Printer Setting

: If you select this option, the Toner Save

feature is determined by the setting you’ve made on the
control panel of the printer.

•

: Select this option to allow the printer to use less

toner on each page.

•

Off

: If you don’t need to save toner to print a document,

select this option.

Click

OTE

The setting in the software application overrides that on

the control panel.

Summary of Contents for ML-2250 Series




































































































































































































Search results

Summary of Contents for ML-2250 Series

Reviews:

Related manuals for ML-2250 Series

Brands by name

Popular brands

Samsung ML-2250 Series, User Manual

Search results

Summary of Contents for ML-2250 Series

Reviews:

Related manuals for ML-2250 Series

Brands by name

Popular brands