Samsung ML-2250 Series User Manual Download Page 66

Page: 66 / 195

SING

RINT

ATERIALS

Printing on Labels

Open the Multi-Purpose Tray and the rear output tray.

Load labels

with the print side up

Guidelines

• Only use labels recommended for laser printers.

• Verify that the labels’ adhesive material can tolerate fusing

temperature of 205°C (400°F) for 0.1 second.

• Make sure that there is no exposed adhesive material

between the labels. Exposed areas can cause labels to peel
off during printing, which can cause paper jams. Exposed
adhesive can also cause damage to printer components.

• Do not feed a sheet of labels through the printer more than

once. The adhesive backing is designed for one pass through
the printer.

• Do not use labels that are separating from the backing sheet

or are wrinkled, bubbled, or otherwise damaged.

Summary of Contents for ML-2250 Series




































































































































































































Search results

Summary of Contents for ML-2250 Series

Reviews:

Related manuals for ML-2250 Series

Brands by name

Popular brands

Samsung ML-2250 Series, User Manual

Search results

Summary of Contents for ML-2250 Series

Reviews:

Related manuals for ML-2250 Series

Brands by name

Popular brands