E-
2
Safety Precautions
X
Read carefully this installation manual before
installation and check if the LonWorks Gateway is
installed correctly after installation.
X
Do not attempt to install or repair this LonWorks Gateway
by yourself.
X
This LonWorks Gateway contains no user-serviceable
parts. Always consult authorized service personnel for
repairs.
X
When moving, consult authorized service personnel for
disconnection and installation of the LonWorks Gateway.
X
Ensure that the wall is strong enough to support the
weight of the LonWorks Gateway.
X
Must install the LonWorks Gateway with rated power
supply.
X
The LonWorks Gateway must be installed according to
the national electrical rules by an installation specialist.
X
If you wish to uninstall the LonWorks Gateway, consult an
authorized installation center.
WARNING
CAUTION
X
Do not use inflammable gases near the LonWorks
Gateway.
X
Do not install the LonWorks Gateway in a location where
it will come into contact with combustible gases,
machine oil, sulphide gas, etc.
X
Avoid locations where acid/alkali solution or special
spray is used.
X
Choose a location that is dry and sunny, but not exposed
to direct sunlight. Suitable temperature is between
0°C(32°F) and 39°C(102.2°F).
X
Do not spill water into the LonWorks Gateway.
X
Do not apply tensile strength to the cable to avoid cable
damage.
X
Do not press the buttons with a sharp object.
X
Do not connect the power cable to the control terminal.
X
If the LonWorks Gateway is installed in a hospital or
other special places, it should not affect other electronic
devices.
This installation manual describes how to install the LonWorks Gateway. For installation
of other optional accessories, refer to the appropriate installation manual.
K
LonWorks
, LON
and Lontalk
are registered trademarks of
Echelon Corporation.
uhzhtptTiX_us~Gn ptluWZ^YWhOXPUGGGY
YWXZTW[TY\GGG㝘㤸GXWaX]aX_
