E-
78
1
Click internet explorer icon(
) twice on your computer.
2
When internet explorer window appears, enter IP address
(http://192.168.0.100)
on the address bar then press [ENTER].
3
If it is the first time to access LonWorks Gateway, “ Install Microsoft Silverlight”
message will appear.
X
If the Microsoft Silverlight has already been installed, the above message will
not appear.
4
Click [Run] button and continue installation.
After installation, access LonWorks Gateway again.
Silverlight operates normally with Windows 7 or later version. It may not
operate normally with previous version of Windows.
5
Enter ID and password when LonWorks Gateway main web page appears, Then
click [LOGIN].
X
If you use accounts with general authorization level to login, you cannot use
the LonWorks Gateway settings.
X
Depending on authorization level set by the administrator, access to some
functions may be restricted.
X
You can change authorization level settings from
System settings
£
User authorization management
.
X
To use the LonWorks Gateway functions, you must login with the ID that is
included in administration group. Factory default LonWorks Gateway ID is
‘admin’ and password is ‘ac0530’.
Note
X
Only authorized users can access web page.
X
Connection speed may slow down. Fewer than 5 concurrent users are
recommended.
X
LonWorks Gateway manager should change ID and password for security
and management.
X
Logout: If you want to logout, click [LOGOUT] on the top of the menu.
LonWorks Gateway will be ended.
X
If you use accounts with authorization level lower than management group or accounts
with general authorization level, you cannot access LonWorks Gateway settings.
X
If you cannot access LonWorks Gateway, consult the manager.
LonWorks Gateway Connection and Login
Setting the LonWorks Gateway
LonWorks Gateway setting (Continued)
zvsuhzhktzYU\MihjMs~piptW]W`\hTWXluUGGG^_
YWX]TW]TXWGGG㝘䟸G\a[[a[\