E-
37
6
Tracking completed message will appear.
Select Zone initialization mode you want.
X
No initialization: No zone information initialization will
be made.
X
Individual initialization: Initialize zone information as
individual mode.
- Individual mode: Arrange by indoor unit main address
on monitoring page.
X
Group initialization: Initialize zone information as group
mode.
- Group mode: Create group by indoor unit group
address (RMC) on monitoring page.
K
Individual mode and group mode can be changed in
[Zone Setting & Edit].
7
Page will be refreshed by clicking [OK]. Then you can
check tracking result.
Note
X
If tracking is executed successfully while ‘NEW’ is set as
communication mode for each
channel, virtual OnOff controller will be assigned to each
channel.
X
If there is no searched oudoor unit, OnOff controller, SIM/
PIM, it is regarded as DVM
tracking failure.
X
If there are devices which have same address, first
searched device will be registered only.
※
Searching order is not fixed.
X
The number of OnOff controller does not contain the
number of virtual OnOff controller.
X
Total number of indoor units includes general indoor
units, ERV, AHU, Fresh ducts, ERV PLUS, Hydro Unit,
Hydro Unit HT, DVM CHILLER and FCU Kit.
X
If you execute tracking, system setting will be
initialized.
X
If tracking result does not match with actual
installation information, there can be critical error in
additional functions such as power distribution.
X
Make sure that tracking information matches to actual
installation information after tracking.
X
If there are errors on indoor and outdoor units while
tracking, the units may not be matched.
zvsuhzhktzYU\MihjMs~piptW]W`\hTWXluUGGGZ^
YWX]TW]TXWGGG㝘䟸G\a[[aZ_