E-
37
7
Select Out Cool setting.
You can enable/disable button to decide whether to use ‘Out Cool’ function.
When ‘Out Cool’ function is set, MINI AHU will operate in fan mode at high fan speed.
8
Select OA Intake setting.
You can enable/disable button to decide whether to use ‘OA Intake’ function.
9
Select Control Discharge Temp.
You can enable/disable button to decide whether to use discharge temperature
adjustment.
Note
Humidification, Humidification level, Out Cool and OA Intake are optional
functions so normal controlling and monitoring will be available when
corresponding option is set on the selected MINI AHU and when it is using
centralized controller that is higher version than ACM-A202D and AIM-B13D
interface module. Controlling and monitoring Cooling/Heating discharged
temperature adjustment is only available when DMS2 is connected directly to
AIM-B13D interface module and it is not available when the DMS2 is
connected to centralized controller.
Refer to ‘Controlling an indoor unit’ for MINI AHU control. (Pages 20~22)
You cannot set the Auto speed for MINI AHU.
MINI AHU sets fan speed to High in Auto mode and Low in Dry mode.
Refer to the ‘Indoor unit operation mode limit’ for MINI AHU operation mode
limit. (Pages 23~25).
Refer to ‘Setting Lower/Upper Temperature Limit of an Indoor Unit’ to adjust
Heat upper limit/Cool lower limit temperature. (Pages 26~27)
Control and Monitoring (Continued)
MIM-D00A_DMS2_IB_E 33388-2.indd 37
2011-08-17 오전 11:01:12
