E-
22
Control and Monitoring (Continued)
7
Select the air flow.
You can select Vertical, Horizontal, All and None air flow direction.
8
Set remote controller settings.
You can select Enable RC, Disable RC, and Cond. RC.
When selecting [Disable RC], indoor unit control by wired/wireless remote controller
and indoor unit panel is not possible. Indoor unit control is only available in
DMS2 web page.
Click [ ] when you want to use wired remote controller in each room.
Note
When filter warning sign is displayed on indoor unit status window
Select the indoor unit and click [Reset filter].
Filter warning will be released.
Make sure that each indoor unit must be turned on to control.
Selecting remote controller, reset filter, operation mode limits, setting lower/upper
temperature limit are possible even if the power of indoor unit is off.
Some air flow direction option may be restricted depending on the indoor unit
model.
7
8
MIM-D00A_DMS2_IB_E 33388-2.indd 22
2011-08-17 오전 11:01:10
