English-22
Selecting a Signal Source (External A/V) for PIP.
3.
Press the
or
buttons to select “Source”, then press the
ENTER
button.
Select the source of the sub picture (PIP) by pressing the
or
buttons and
press the
ENTER
button.
The sub picture can serve different source selections based on what the main picture is set to.
Swapping the Contents of the PIP and Main image
4.
Press the
or
buttons to select “Swap”, then press the
ENTER
button.
SWAP is available in HDMI mode only.
Changing the PIP Channel
5.
Press the
or
buttons to select “Channel”, then press the
ENTER
button.
Press the
or
buttons to select the desired channel in the PIP window.
Press the
ENTER
buttons.
The channel can be active when the sub picture is set to TV.
Changing the Position of the PIP Window
6.
Press the
or
buttons to select “Position”, then press the
ENTER
button.
Press the
or
buttons to select the desired PIP window position.
Press the
ENTER
buttons.
The Double (
), Double Wide (
) mode cannot be selected in Position mode.
Changing the Size of the PIP Window
7.
Press the
or
buttons to select “Size”, then press the
ENTER
button.
Press the
or
buttons to select the desired size of the PIP window.
Press the
ENTER
button.
Press the
EXIT
button to exit.
If main picture is in
PC
mode,
Size
is not available.
• You may notice that the picture in the PIP window becomes slightly unnatural when
you use the main screen to view a game or karaoke.
• You can adjust picture position only by using the
size menu.
Press the
SOURCE
button on the remote control to select a signal from an external source PIP.
Press the
POSITION
button on the remote control to change the position of the PIP screen.
Press the
CH
buttons on the remote control to change the channels in the PIP screen.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 22
