English-14
Changing Channels
1.
Press the
CH
or
CH
button to change channels.
When you press the
CH
or
CH
button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have memorized
at least three channels). You will not see channels that were either erased or not
memorized. See page 16 to memorize channels.
If you want to reset this feature...
1.
Press the
MENU
button to display the menu.
Press the
or
button to select “Setup”, then press the
ENTER
button.
2.
Press the
ENTER
button again, to select “Plug & Play”.
3.
The message “Start Plug & Play” is displayed.
If you wish more details on the options of the setup, refer to the previous page.
Plug & Play can only be accessed in the TV mode.
Using the Channel Buttons
1.
Press the
PRE-CH
button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number button to select the second channel. Then use the
PRE-CH
button to quickly
alternate between them.
Using the PRE-CH Button to select the Previous Channel
Adjusting the Volume
1.
Press the
VOL
or
VOL
buttons to increase or decrease the volume.
1.
Press
MUTE
button and the sound cuts off.
The word “ ” will appear in the lower-left corner of the screen.
2.
To turn mute off, press the
MUTE
button again, or simply press the
VOL
or
VOL
buttons.
Using Mute
At any time, you can cut off the sound using the MUTE button.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 14
