English - 16
Storing Channels in Memory (Automatic Method)
1.
Press the
MENU
button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the
ENTER
button.
2.
Press the ▲ or ▼ button to select "Auto Program", then press the
ENTER
button.
3.
Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER
button.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Air+Cable: “Air” and “Cable” antenna signals.
4.
When selecting the Cable TV system : Press the
ENTER
button to start the auto
program. By default, the cable TV system is set to “STD”. If you want to select
another type of cable system, press the ▲ or ▼ button to select
“STD”, “HRC” or “IRC”.
STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
Press the
ENTER
button to start the auto program.
To stop the search before it has finished, press the
ENTER
button with “Stop”
selected.
5.
After all the available channels are stored, the “Auto Program” menu reappears.
Press the
ExIT
button to exit.
Move
Enter
Return
Select the antennas to memorize.
Channel
Move
Enter
Return
TV
Start
Air
Cable
Air+Cable
Start
Start
Move
Enter
Return
Select the cable system.
Auto Program
Move
Enter
Return
TV
Analog
Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Antenna
: Air
►
Auto Program
►
Clear Scrambled Channel
►
Channel List
►
Name
►
Fine Tune
►
Signal Strength
►
LNA
: On
►
Channel
Move
Enter
Return
TV
Auto Program
Plug & Play
40%
Stop
Enter
Return
Auto Program in Progress.
Cable Channel 20
Auto Program
Auto Program
Enter
Return
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
OK
BN68-01310A-00Eng_0709.indd 16
2007-07-20 �� 3:25:48
