Samsung LA32C630 Series User Manual Download Page 39

Page: 39 / 46

English

Other Information

Wall Mount Kit Specifications (VESA)

Wall mount kit is not supplied but sold separately.

✎

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact

your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

NOTE

✎

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or

the consumer fails to follow the product installation instructions.
Standard dimensions for wall mount kits are shown in the table below.

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ

depending on their specifications.
Do not use screws that do not comply with the VESA standard screw specifications.

Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal

injury. Samsung is not liable for these kinds of accidents.
Do not exceed 15 degrees tilt when mounting this TV.

Product

Family

inches

VESA Spec. (A * B)

Standard Screw Quantity

LCD-TV

19~22

75 X 75

100 X 100

23~29

200 X 100

30~40

200 X 200

46~55

400 X 400

57~65

600 X 400

70~80

800 X 400

80~

1400 X 800

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.

Assembling the Cables

Enclose the cables in the Cable tie so that the cables are not visible through the
transparent stand. Overly rigid or thick cables can damage input jacks for long
term usage.

Cable Tie

BN68-02742A_Eng.indb 39

2010-03-09 �� 2:49:50

Summary of Contents for LA32C630 Series















































Search results

Summary of Contents for LA32C630 Series

Reviews:

Related manuals for LA32C630 Series

Brands by name

Popular brands

Samsung LA32C630 Series, User Manual

Search results

Summary of Contents for LA32C630 Series

Reviews:

Related manuals for LA32C630 Series

Brands by name

Popular brands