background image

12

English

Basic Features

Changing the Picture Options

 

¦

Advanced Settings

(available in 

Standard / Movie

 mode)

You can adjust the detailed setting for the screen including 
colour and contrast.

In PC mode, you can only make changes to 

 

Dynamic 

Contrast, Gamma

 and 

White Balance

.

Black Tone (Off / Dark / Darker / Darkest)

 

: Select the 

black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High)

 

: Adjust 

the screen contrast.

Shadow Detail (-2~+2)

 

: Increase the brightness of dark 

images.

Disabled under PC mode.

 

Gamma

 

 (-3~+3)

: Adjust the primary colour intensity.

Expert Pattern

 

 (Off / Pattern 1 / Pattern 2)

: By 

running the 

Expert Pattern

 function, the picture can be 

calibrated without a generator or filter. If the OSD menu 
disappears or a menu other than the 

Picture

 menu is 

opened, the calibration is saved and the 

Expert Pattern

 

window disappears.

While the 

 

Expert Pattern

 is running, sound is not 

outputted.
Only enabled in DTV, Component and HDMI 

 

modes.

RGB Only Mode (Off / Red / Green / Blue)

 

: You can 

adjust 

Colour

 or 

Tint

 of 

Red

Green

 or 

Blue

 for the 

picture from an external device (DVD player, home 
theatre, etc.). 

Colour Space (Auto / Native / Custom)

 

: Adjust the 

range of colours available to create the image. To adjust 

Colour

Red

Green

Blue

 and 

Reset

, set 

Colour 

Space

 to 

Custom

.

White Balance

 

: Adjust the colour temperature for a 

more natural picture.

R-Offset / G-Offset / B-Offset

: Adjust each colour’s 

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain

: Adjust each colour’s (red, 

green, blue) brightness.

Reset

: Resets the 

White Balance

 to it’s default settings.

10p White Balance (Off / On)

 

: Controls the white 

balance in 10 point interval by adjusting the red, green, 
and blue brightness.

Available when the picture mode is set to Movie 

 

and when the external input is set to HDMI or 
Component.
Some external devices may not support this 

 

function.

Interval

: Select interval to adjust.

Red

: Adjust the red level.

Green

: Adjust the green level.

Blue

: Adjust the blue level.

Reset

:  Resets the 10p White Balance to its default 

settings.

Flesh Tone

 

: Emphasize pink “

Flesh Tone

.”

Edge Enhancement (Off / On)

 

: Emphasize object 

boundaries.

xvYCC (Off / On)

 

: Setting the 

xvYCC

 mode to on 

increases detail and colour space when watching movies 
from an external device (e.g. DVD player) connected to 
the HDMI or Component IN jacks.

Available when the picture mode is set to 

 

Movie

 

and when the external input is set to HDMI or 
Component.
Some external devices may not support this 

 

function.

Picture Options

In PC mode, you can only make changes to the 

 

Colour 

Tone

Size, Digital Noise Filter

 and 

Auto Protection 

Time

.

Colour Tone (Cool / Normal / Warm1 / Warm2) 

 

Warm1 

 

or 

Warm2

 will be deactivated when the 

picture mode is 

Dynamic

.

Settings can be adjusted and stored for each 

 

external device connected to an input on the TV.

Picture Options

Colour Tone 

: Normal 

 

Size 

: 16:9

Digital Noise Filter 

: Auto

MPEG Noise Filter 

: Auto

hDMI Black Level 

: Normal

Film Mode 

: Off 

100hz Motion Plus 

: Standard

 

U

 Move    

E

 Enter   

 R

 Return

Advanced Settings

Black Tone  

: Off 

 

Dynamic Contrast 

: Medium

Shadow Detail 

: 0

Gamma 

: 0

Expert Pattern      

: Off

RGB Only Mode 

: Off

Colour Space 

: Native

U

 Move   

 E

 Enter    

R

 Return

BN68-02742A_Eng.indb   12

2010-03-09   �� 2:49:33

Summary of Contents for LA32C630 Series















































Reviews: