manualshive.com logo in svg

Samsung iPOLiS 3120V, User Manual

Share
Download
Samsung iPOLiS 3120V User Manual Download Page 88

setup screen

88_

 setup screen

NETWORK SETUP

Interface

1. 

From the Setup menu, select the 
<

Network ( 

 )

> tab.

2. 

Click <

Interface

>.

3. 

Set the <

Interface

> and <

IPv6 setup

> 

as necessary. 

 

IP type : Select an IP connection 
type.

 

- Manual : Specify the IP address, 

Subnet Mask, Gateway, DNS1, 
and DNS2. 

 

- DHCP : Specify the DNS1 and DNS2.

 

- PPPoE : Specify the DNS1, DNS2, ID and password. 

 

If you set it to <

Manual

>, you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually.

 

MAC address : Shows the MAC address. 

 

IP address : Displays the current IP address. 

 

Subnet mask : Displays the <

Subnet mask

> for the set IP. 

 

Gateway : Displays the <

Gateway

> for the set IP. 

 

DNS1/DNS2 : Displays the DNS(Domain Name Service) server address. 

 

IPv6 use : Specify the use of IPv6. 

 

IPv6 address : Obtains the IPv6 address to access the IPv6 network.

4. 

When done, click [

Apply ( 

 )

].

 

J

 

The IP addressing system will be defaulted to DHCP. However, if the DHCP server is still not found 
after 1 minute, the IP system will switch to Static automatically.

Summary of Contents for iPOLiS 3120V











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands