setup screen
86_
setup screen
3.
Press the [
] button.
Your settings will be entered in the right list.
4.
Press the [
] button.
Set data on the right list will be saved.
5.
Press the [
] button.
Selected tour data will be deleted.
To set the tracing function
Tracking remembers the trace of movements instructed using the direction button and
reproduces it for your reference.
1.
Set <
Mode
> in <
Sequence setup
> to
<
Trace & Auto Run
>.
The menu screen will switch to the
PTZ tracking and Auto operation menu
screen.
2.
Select a tracking number.
You can save the trace in memory
within 120 seconds.
The saving time may differ depending
on the difficulty of the PTZ operation.
The operation will be saved in memory (with the memory status displayed). When
the memory is full and the “
EEPROM: 000%
” message appears, tracking will be
terminated.
3.
Press the [
] button.
Selected tracing number will be saved.
4.
Press the [
] button.
Selected tracing number will be activated as set.
5.
Press the [
] button.
Tracing will be stop.
