English
_35
●
INST
ALLA
TION & CONNECTION
3.
Connect the safety wire (attached to the camera) to the surface mount as shown.
Then, arrange the cables.
For more information about the wiring, refer to “
Camera Wiring Interface Board
”. (Page 16)
4.
Arrange the cables inside the surface mount so that they should not be entangled or stuck
in, and align the guide rib of the camera with that of the surface mount. Use the L-shaped
wrench to tighten the screws (x4) so that the camera is secured to the mount.
To ensure waterproofness, take caution lest that the outer gasket should get loose or be
stuck in.
Safety-wire
Screw
Main-frame
Gasket
Guide-Rib of
Main-frame
Guide Rib of
Surface Mount
Surface Mount
