64
English
Basic Functions
The models below support audio sync
settings. Press
iPod SYNC
on the remote
control to change audio delay.
Supported Models : classic/3G nano/4G
nano/120GB classic/160GB Classic/5G nano
3D Sound
You can enjoy more natural and vivid
surround sound with enriched tones by
adjusting the depth of sound using the
level options.
3D SOUND OFF
3D SOUND HIGH
3D SOUND MEDIUM
3D SOUND LOW
NOTE
3D Sound is not available in
FM
mode.
Using the SHIFT button
ENTER
, ▲▼◄►,
S.DIRECT
,
TONE
,
SLEEP
and
AUDIO ASSIGN
button
will operate, after pressing the
SHIFT
button.
NOTE
ENTER
, ▲▼, and ◄► buttons are active
even when you don't press the
SHIFT
button.
TONE
After pressing the
SHIFT
button, and
then Press the
TONE
button repeatedly
to select the option you want.
You can adjust the each value by
pressing the ▲▼ buttons.
BASS
: -6dB ~ +6dB
TREBLE
: -6dB ~ +6dB
TONE
: ON, OFF
NOTE
The Tone Control function can be applied to
all channels except for the subwoofer.
If it is set to
TONE OFF
, the Tone Control
function will be disabled.
✎
✎
•
•
•
✎
Setting the speakers with DPL IIx
Set the 7.1CH Connection settings to
"Surround Back". (For further details, refer to
page 41.)
Press the
PL II
button of the remote
control until the desired setting is
displayed. Once selected with the desired
mode, sound will be heard through the
surround speakers.
MOVIE
Adds realism to the movie
soundtrack.
MUSIC
When listening to music, you can
experience sound effects as if you
are listening to the actual
performance.
GAME
You can hear like game sound.
MATRIX
You will hear multi channel
surround sound.
PL
You can listen to a 2CH sound
source in 5.1CH surround sound
with all speakers active.
- A specifi c speaker(s) may not be
output depending on the input
signal.
PL OFF
PL mode will be off.
iPod SYNC
If you insert your iPod player into the
iPod Dock that has already been
connected to the system, you can play
the video fi les in your iPod player
through the connected TV.
If the video signal does not synchronize properly
with the audio signal, press
iPod SYNC
on the
remote control to correct the synchronization.
NOTE
Before you can play the video fi les in the iPod
player, you must connect the Audio/Video
terminals of the TV to the receiver using the
Composite (A/V) cable.
1.
2.
✎
B
HW-D7000_XAC_0516.indd 64
HW-D7000_XAC_0516.indd 64
2011-05-16 3:46:56
2011-05-16 3:46:56
