42
Setup
CONNECTION SETTING FOR SURROUND BACK
Settings for the surround back speaker differ depending on the connection method and installation site of the
speaker to be connected. You must confi gure the SB SETUP settings according to the connected speaker before
you listen to music properly.
Press the
SETUP/MENU
button on the remote control.
Each time the button is pressed, the mode switches between
SETUP
ENTER
and
SETUP OFF
.
Press the
ENTER
button to select
SETUP ENTER
.
Press the ▲▼ buttons to select
SB SETUP
, and then press the
ENTER
or ► button.
Press the ▲▼ to select a proper setting for the surround back speaker.
SURR-BACK
: Select this if you want to install the surround back
speaker in the default settings. With this setting, you can enable the
Dolby Pro Logic IIx mode.
PLIIz
: Select this if you want to install the surround back speaker in the
top front corner. With this setting, you can enable the Dolby Pro Logic IIz
mode.
ZONE2
: Select this if you want to connect the ZONE2-specifi c speakers (left/right) to the surround back port.
With this setting, you can enable the Powered ZONE2 feature.
Bi-AMP
: Select this if you want to connect the Bi-Amp compliant speaker to the surround back port. With
this setting, you can enable the Bi-Amp feature.
Depending on the SB SETUP settings, the surround back speaker or front height speaker menus may not
be activated or may differ in the speaker menu: SPEAKER SIZE, SPEAKER LEVEL, SPEAKER DISTANCE.
Depending on your setting, you may not use different features simultaneously. If you set SURR-BACK, for
instance, you cannot use the following features: PLIIz, ZONE2 and Bi-AMP.
1.
•
2.
3.
4.
•
•
•
•
M
Æ
Æ
- HW-C900-XAA_0831.indd 42
- HW-C900-XAA_0831.indd 42
2010-08-31 6:22:26
2010-08-31 6:22:26
