Samsung HW-C900-XAA User Manual Download Page 9

Page: 9 / 70

ENG

●

DESCRIPTION

S.DIRECT BUTTON

Used to select the S.DIRECT mode.

(Output the original signal as it is without applying the sound ﬁ eld effect or any other sound effect.

MASTER VOLUME CONTROL

Adjusts the volume level.

POWER

Turns the receiver on/off.

PHONE JACK

Used to connect a set of headphones.

AUX IN JACKS

Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device.

ASC MIC JACK

Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration).

UP(

), DOWN(

), LEFT(<),

RIGHT(>) BUTTONS

Used to move the cursor up, down, left or right.

Also used to select detailed options in the AUDIO EFFECT mode and to change the tone level.

MULTI CH BUTTON

Used to select a connected 7.1 multi channel player.

AV SYNC BUTTON

Used to select the Audio Delay Mode.

TUNING MODE BUTTON

Used to select the Manual or Preset mode for FM radio.

SELECT BUTTON

Used to change the radio frequency.

TUNER MEMORY BUTTON

Used to set a preset radio frequency.

- HW-C900-XAA_0831.indd 9

2010-08-31 6:21:37

Summary of Contents for HW-C900-XAA







































































Search results

Summary of Contents for HW-C900-XAA

Reviews:

Related manuals for HW-C900-XAA

Brands by name

Popular brands

Samsung HW-C900-XAA, User Manual

Search results

Summary of Contents for HW-C900-XAA

Reviews:

Related manuals for HW-C900-XAA

Brands by name

Popular brands