Samsung HW-C900-XAA User Manual Download Page 47

Page: 47 / 70

ENG

●

SETUP

SETTING TONE CONTROL

This will enable you to adjust the bass and treble level.

Press the

SETUP/MENU

button on the remote control.

Each time the button is pressed, the mode switches between

SETUP

ENTER

and

SETUP OFF

Press the

ENTER

button to select

SETUP ENTER

Press the ▲▼ buttons to select

TONE CONTROL

, and then press the

ENTER

or ► button.

Press the ▲▼ buttons to select the option you want, and then press the

ENTER

or ► button.

Each time you press this button, TONE

BASS

TREBLE will be

selected in turn.

Press the ▲▼ buttons to set the Tone Control mode you want.

If it is set to

TONE OFF

, the Tone Control function will be disabled.

You can adjust it from -6 to +6dB by 1 step.
The sound gets quieter at -6dB and louder at +6dB.

- To exit setup mode -

Press the

SETUP/MENU

button on the remote control.

SETUP OFF

appears on the display and Setup Mode is exited.

The Tone Control function can be applied to all channels except for the subwoofer.

•

•
•
•

•



SETTING NEO:6 MODE

You can play back 2 channel sound over 7.1 channels when enjoying music or a movie.

Press the

SETUP/MENU

button on the remote control.

Each time the button is pressed, the mode switches between

SETUP

ENTER

and

SETUP OFF

Press the

ENTER

button to select

SETUP ENTER

Press the ▲▼ buttons to select

NEO:6 SETUP

, and then press the

ENTER

or ► button.

Press the ▲▼ buttons to set the C-IMAGE mode you want.
You can set

C-IMAGE

from 0 to 5

This parameter adjusts the center image through the front and center
speakers. "5" is the wider.

- To exit setup mode-

Press the

SETUP/MENU

button on the remote control.

SETUP OFF

appears on the display and Setup Mode is exited.

Using NEO:6 mode

Press the

NEO:6

button on the remote control.

MUSIC

: When listening to music, you can experience sound effects as if you are listening to the actual

performance.

CINEMA

: Adds realism to the movie soundtrack.

OFF

: Output the original signal as it is without applying the sound ﬁ eld effect or any other sound effect.

NEO:6 works only for 2-ch audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.

•

•
•



- HW-C900-XAA_0831.indd 47

2010-08-31 6:22:26

Summary of Contents for HW-C900-XAA







































































Search results

Summary of Contents for HW-C900-XAA

Reviews:

Related manuals for HW-C900-XAA

Brands by name

Popular brands

Samsung HW-C900-XAA, User Manual

Search results

Summary of Contents for HW-C900-XAA

Reviews:

Related manuals for HW-C900-XAA

Brands by name

Popular brands