Samsung HW-C900-XAA User Manual Download Page 19 | Manualshive

Page: 19 / 70

background image

19

ENG

●

CONNECTIONS

CONNECTING THE Bi-AMP SPEAKER

Connect the tweeter (high range) port and woofer (low range) to the front port and surround back speaker port
respectively as appropriate. Then, you can use the bi-ampliﬁ cation feature that supports enriched high range and
base tones.

Connect the FRONT L connector (rear side of main unit) to the Tweeter port in the front left speaker.

Connect the FRONT R connector (rear side of main unit) to the Tweeter port in the front right speaker.

Connect the SURROUND BACK L connector (rear side of main unit) to the Woofer port in the front left speaker.

Connect the SURROUND BACK R connector (rear side of main unit) to the Woofer port in the front right
speaker.

To enable the Bi-Amp feature, you must set SB SETUP to Bi-AMP in SETUP menu. See page 42.

With the Bi-amp feature, you can use up to 5.1 channels for speaker output in the main unit.

If Bi-amp is active, you may encounter a restricted access if you have not removed the shorting bar (like a
jumper) in both tweeter and subwoofer ports in the front speaker.

Before you can use bi-amp, ensure that you use a speaker that supports bi-amplifying.

1.

2.

3.

4.

M




J





Bi-AMP Speaker L

Bi-AMP Speaker R

Tweeter

Woofer

Tweeter

Woofer

- HW-C900-XAA_0831.indd 19

- HW-C900-XAA_0831.indd 19

2010-08-31 6:21:46

2010-08-31 6:21:46

«
...
17
18
19
20
21
...
»

Summary of Contents for HW-C900-XAA







































































Reviews:

No comments

Related manuals for HW-C900-XAA

Brand: Magnat Audio Pages: 64

Brand: Icom Pages: 27

Brand: JAMO Pages: 4

Brand: Panasonic Pages: 7

Brand: Boss Pages: 17

Brand: Icom Pages: 32

Brand: Dual Pages: 38

Success AG-511N

Brand: technoac Pages: 29

Brand: SAL Pages: 60

Brand: FrontRow Pages: 32

Brand: Perstel Pages: 17

Brand: PS Engineering Pages: 40

Brand: QRP Labs Pages: 66

Brand: Inclusive Technology Pages: 8

Brand: JVC KENWOOD Pages: 48

Brand: Spektrum Pages: 16

Brand: Leica Pages: 162

Brand: Hi-Target Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands