24
GB
OPERATION
25
Disc Playback
DVD
VCD
CD
1
Press the
OPEN/CLOSE
button to open the disc tray.
2
Load a disc.
Place a disc gently into the tray with the disc’s label facing up.
3
Close the compartment by pressing the
OPEN/CLOSE
button again.
Playback starts automatically.
d
To stop playback, press the
STOP
button during playback.
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the
PLAY/PAUSE
(
) button or
ENTER
button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, <STOP> is displayed, and if the
PLAY/PAUSE
(
) button is pressed, playback starts
from the beginning.
d
To temporarily pause playback, press the
PLAY/PAUSE
(
) button during playback.
To resume playback, press the
PLAY/PAUSE
(
) button again.
Depending on the content of the disc, the initial screen may appear different.
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protec-
tion system) recommendations.
•
•
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-X20/HT-TX22/HT-TX25's Remote Control
The DVD Home Theater's remote can be used to control Samsung TVs.
1
Plug the main unit's power cord into the AC power supply.
Before plugging your system into a main socket, you must checkthe voltage
setting (OPTIONAL). If the voltage of the socket doesnot correspond to the
setting on the rear of the unit, you mayseriously damage your system.
2
Press the
TV
button to set the remote to TV mode.
3
Press the
POWER
button to turn on your Samsung TV with this remote.
4
Press the
TV/VIDEO
button to select VIDEO mode on your TV.
5
Press the
DVD RECEIVER
button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the
FUNCTION
button on the main unit or
DVD button on the remote
to enable DVD/CD playback.
•
VIDEO
Selecting the Video Format
Press the and hold
NT/PAL
button on the remote controller for over 5 seconds
while the power is turned off.
By default, the video format is set to <PAL>.
<NTSC> or <PAL> will appear in the display. At this time, press the
NT/PAL
button
shortly to select between <NTSC> and <PAL>.
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format
of your TV.
