manualshive.com logo in svg

Samsung GX10 - Digital Camera SLR, User Manual

Share
Download
Samsung GX10 - Digital Camera SLR User Manual Download Page 65

ŝ

64

Ş

Other Shooting Modes

4. Use the four-way controller (

ȜȞ

) to select        or         .

5. Press the 

OK

button twice. 

The camera is ready to take pictures.

6. Confirm in the viewfinder that the subject you wish to shoot is in

the display and press the shutter release button halfway.
The focus indicator        appears when the subject is in focus.

7. Press the shutter release button fully.

, the self-timer lamp starts blinking slowly at first and then

blinks rapidly for 2 seconds before the shutter is released.
The beep is heard and the rate increases.
The shutter will be released about 12 seconds after the shutter
release button is pressed fully.

, the shutter will be released about 2 seconds after the

shutter release button is pressed fully.

8. Turn the camera off after shooting.

ſ

You can cancel the self-timer. Press the MENU, Fn, Playback
button or rotate the Mode dial Whlie the self-timer is operating. 

Self-Timer (12 secs)

DRIVE

: Set

: Move

Summary of Contents for GX10 - Digital Camera SLR







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands