manualshive.com logo in svg

Samsung GX10 - Digital Camera SLR, User Manual

Share
Download
Samsung GX10 - Digital Camera SLR User Manual Download Page 39

ŝ

38

Ş

Using the memory card

ƈ

SD / SDHC memory card and Multi Media Card can be used with this camera. 

ƈ

Captured images are recorded on the Memory Card. Make sure the camera is turned off before
inserting or removing the Memory Card.

1. Lift up the Card Cover Lock as shown (

ڹ

) and rotate it to the

OPEN

direction (

ں

) (Card cover opens 

ڻ

). 

2. Have the front of the memory card facing toward the LCD

monitor and insert the memory card.

ſ

To remove the card, push it as shown.

3. Close the Card cover.

ſ

Close the Card cover firmly or the camera will not turn on. 

ƃ

Do not remove the Memory Card while card access lamp is lit.

ƃ

Always format new Memory Cards before use. Also format Memory Cards used with other
cameras. Refer to “Formatting the Memory Card” (p.150) for details on formatting.

INFORMATION

Inserting / Removing the Memory Card

Summary of Contents for GX10 - Digital Camera SLR







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands