Samsung GX10 - Digital Camera SLR User Manual Download Page 184

Page: 184 / 262

183

Using the Mode Dial

2. Press the Green button.

- Automatically switches shutter speed and aperture to the

proper exposure.

- Turn the front or rear e-dial to change to the exposure to

your liking and take a picture. Adjust the shutter speed with
the front e-dial and aperture with the rear e-dial.

When the sensitivity is set to [Auto] and exposure mode is set to

(Manual) mode, the sensitivity

is the lowest sensitivity.

The viewfinder indicator blinks when the difference from appropriate exposure is over

3.0.

Set the shutter speed and aperture values in increments of 1/2 EV or 1/3 EV.
Set in [EV Steps] in the [CUSTOM1 MENU] menu. (p.133)

Set the aperture to the A position while holding down the auto-
lock button when using a lens with an aperture ring.

INFORMATION

Summary of Contents for GX10 - Digital Camera SLR




























































































































































































































































Search results

Summary of Contents for GX10 - Digital Camera SLR

Reviews:

Brands by name

Popular brands

Samsung GX10 - Digital Camera SLR, User Manual

Search results

Summary of Contents for GX10 - Digital Camera SLR

Reviews:

Brands by name

Popular brands