manualshive.com logo in svg

Samsung GX10 - Digital Camera SLR, User Manual

Share
Download
Samsung GX10 - Digital Camera SLR User Manual Download Page 200

ŝ

199

Ş

Setting the Exposure

ƈ

Correct exposure of the subject is determined by the combination of shutter speed and aperture
setting. There are many correct combinations of shutter speed and aperture for a particular subject.
Different combinations produce different effects.

ƈ

The shutter speed determines the length of time that light is allowed to strike the CCD. Adjusting the
shutter speed alters the amount of light striking the CCD.

ƃ

Using slower shutter speed

If the subject is moving, the image will be blurred because the
shutter is open longer. 
It is possible to enhance the effect of motion (rivers, waterfalls,
waves, etc.) by intentionally using a slower shutter speed.

ƃ

Using faster shutter speed

Choosing a faster shutter speed will allow freezing the action of a
moving subject.
A faster shutter speed also helps preventing camera shake.

Effect of Aperture and Shutter Speed

Effect of Shutter Speed

Summary of Contents for GX10 - Digital Camera SLR







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands