Samsung GX10 - Digital Camera SLR User Manual Download Page 103

Page: 103 / 262

You can delete JPEG, RAW images taken with the RAW button.

1. Press the button and use the four-way controller (

ȜȞ

)

to select images to delete.

Deleting images taken with the RAW button

102

Deleting Images

DNG

2. Press the button.

The Delete screen appears.

3. Use the four-way controller (

Ɗƌ

) to select deletion type.

- [Delete JPEG]

: only JPEG format images among the

selected images are deleted.

- [Delete RAW]

: only RAW format images among the

selected images are deleted.

- [Delete RAW+JPEG ] : RAW and JPEG format images among

the selected images are deleted.

: Set

: All images

Delete JPEG

Delete RAW

Delete RAW+JPEG

Cancel

100-0080

: Set

: All images

Delete JPEG

Delete RAW

Delete RAW+JPEG

Cancel

Summary of Contents for GX10 - Digital Camera SLR




























































































































































































































































Search results

Summary of Contents for GX10 - Digital Camera SLR

Reviews:

Related manuals for GX10 - Digital Camera SLR

Brands by name

Popular brands

Samsung GX10 - Digital Camera SLR, User Manual

Search results

Summary of Contents for GX10 - Digital Camera SLR

Reviews:

Related manuals for GX10 - Digital Camera SLR

Brands by name

Popular brands