Samsung Galaxy S6 edge G925P, User Manual, Page: 308 / 428

Settings 297
Bluetooth Settings Operations
● Enable Bluetooth : In Bluetooth settings, tap the ON/OFF switch to enable.

When enabled, confirmation appears for your phone to be discoverable by other devices.
Follow the instructions.
● Pairing Bluetooth Devices : Make sure the other devices are set to be discovered. From
Bluetooth settings, tap the device name in “Available devices” and follow the instructions.

Depending on the device, you may be required to enter or accept a passkey.

If the target device does not appear, tap Scan to search again.

This setting is available when Bluetooth is enabled.
● Change the Name of a Paired Device : From Bluetooth settings, tap Settings next to a
paired device name, tap Rename , enter a new name, and tap Rename .

Emoji cannot be used in a device name.

This setting is available when Bluetooth is enabled.
● Cancelling Pairing : From Bluetooth settings, tap Settings next to a paired device name, and
then tap
Unpair
.

This setting is available when Bluetooth is enabled.
● Enable Service from Paired Device : From Bluetooth settings, tap Settings next to a paired
device name, and then tap the listing under Use for .

If a confirmation prompt appears, follow the instructions.

This setting is available when Bluetooth is enabled.

This setting is available when the paired device is providing a service.

Tap the ON/OFF switch to turn the option on.
● Search for Other Devices : From Bluetooth settings, tap Scan .

This setting is available when Bluetooth is enabled.
● Check Files Received via Bluetooth Transfer : From Bluetooth settings, tap More > Received
files , and follow the instructions.