Multimedia 169
4.
Tap
Scan
and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap
Multi-connect
➔
Scan
and select all the device
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note:
The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
5.
Tap
Done
. The direct connection is then established.
Confirm
appears in the Status bar.
6.
When prompted to complete the connection, the
recipient should tap
OK
. Your status field now reads
“Connected” and your connected device is listed within
the Wi-Fi Direct devices listing.
7.
Each partner (including yourself) must then tap
Accept
to consent to the new Wi-Fi Direct pairing.
To enable Share shot on Camera:
1.
From the Home screen, tap
(
Camera
)
➔
(
Shooting Mode
)
➔
Share shot
.
2.
If you are prompted to activate your Wi-Fi Direct
connection, tap
OK
and follow the activation
procedures for Wi-Fi Direct.
To configure your Share Shot options:
1.
Confirm the Share Shot viewfinder is active (see
below).
2.
Confirm the Wi-Fi is actively sharing icon (
)
appears at the top of the viewfinder window.
3.
Tap
(
Share profiles with
) to display list of current
participants.
•
Stop sharing images with select participants by tapping their
entry and removing the green check mark.
4.
Tap
(
Shooting modes
) to display list of currently
available shooting modes from within Share Shot.
5.
Tap
(
Settings
) to disable share shot while
maintaining a Wi-Fi Direct connection.
