Samsung Galaxy Prevail LTE, User Manual

Page: 305 / 380

Settings 296
● Pairing Bluetooth Devices : Make sure the other devices are set to be discovered. From
Bluetooth settings, tap the device name in “Available devices” and follow the onscreen
instructions.

Depending on the device, you may be required to enter or accept a passkey.

If the target device does not appear, tap Scan to search again.

This setting is available when Bluetooth is enabled.
● Change the Name of a Paired Device : From Bluetooth settings, tap Settings next to a
paired device name, tap
Rename
, enter a new name, and tap
OK
.

Emoji cannot be used in a device name.

This setting is available when Bluetooth is enabled.
● Cancelling Pairing : From Bluetooth settings, tap Settings next to a paired device name,
and then tap Unpair .

This setting is available when Bluetooth is enabled.
●
Enable Service from Paired Device
: From Bluetooth settings, tap
Settings
next to a paired
device name, and then tap the listing under Profiles .

If a confirmation prompt appears, follow the onscreen instructions.

This setting is available when Bluetooth is enabled.

This setting is available when the paired device is providing a service.

Tap the ON/OFF switch to turn the option on or off.
●
Search for Other Devices
: From Bluetooth settings, tap
Scan
.

This setting is available when Bluetooth is enabled.
● Set Visibility Timeout : From Bluetooth settings, tap More options > Visibility timeout and
select an option.

Tap Never timeout to allow your phone always to be discoverable unless you turn off
discoverability.

This setting is available when Bluetooth is enabled.
● Check Files Received via Bluetooth Transfer : From Bluetooth settings, tap More options >
Received files , and follow the onscreen instructions.